Skip to main content
 THE COMPLETE GUIDE · UK PROPERTY OWNERS

Fire & Smoke Damage Repair: The Complete Guide

A practical guide to fire and smoke damage, professional restoration, insurance claims and reinstating UK properties.

Just experienced a fire?

Your safety comes first. Do not re-enter a fire-damaged building until the fire service or another appropriate professional has confirmed it is safe. Read the immediate steps

A fire at your home or business can turn everything upside down very quickly.

Once the flames are out, it’s completely normal to look around and wonder where on earth you’re supposed to start. There may be obvious fire damage, blackened walls, broken windows and damaged furniture, but there can also be smoke and soot throughout rooms that were nowhere near the fire itself. On top of that, you may be dealing with water from firefighting, damaged electrics, structural concerns, security issues and an insurance claim that suddenly involves several different people.

Even a relatively contained fire can create a much larger repair than you might expect.

That’s because restoring a fire-damaged property isn’t simply about replacing the things that were burnt. The property may need to be made safe, investigated, stripped out, professionally cleaned, deodorised, dried and then rebuilt. Smoke can travel well beyond the room where the fire started, and firefighting efforts can create water damage that also needs dealing with before reinstatement can begin.

This guide draws on different types of fire reinstatement, from properties affected by smoke from nearby premises to major losses involving roof replacement, structural repairs and extensive internal work. Project examples are included where they help explain a practical issue.

So, in this guide, we’ll take you through the complete fire and smoke damage repair process. We’ll explain what to do immediately after a fire, how smoke and soot damage are assessed, what can often be cleaned and what may need replacing, how odour removal works, what happens when firefighting water causes additional damage, how your insurance claim is likely to progress and what happens when it’s finally time to rebuild.

If you’ve only just experienced a fire, you don’t need to understand everything today. Start with the first section, make sure the property is safe and take the process one stage at a time.

Jump to a section
01
Start here

What to do immediately after a fire

What should you do immediately after a fire?

Once the fire brigade has dealt with the incident, the urge to get back inside and see what can be saved can be very strong.

But safety has to come first.

A property can remain dangerous after the visible fire has been extinguished. Fire may have weakened floors, ceilings, roofs and structural elements, while electricity, gas, shattered glass, contaminated residues and hidden hot spots can create additional risks.

You should not re-enter a fire-damaged building until the fire service or other appropriate professional has confirmed that it is safe to do so. Fire and rescue guidance also recommends taking professional advice where structural damage may be present rather than assuming that a building is safe simply because the flames have gone.

Make sure everybody is safe first

If anybody has been exposed to smoke or feels unwell following the fire, health comes before the property.

Smoke inhalation can sometimes cause symptoms that aren’t immediately obvious. If you or somebody else develops breathing difficulties, feels unwell or has concerns following smoke exposure, seek appropriate medical advice.

Once everybody is safe, you can begin dealing with the property itself.

Don’t turn utilities back on yourself

Gas, electricity and water supplies may have been switched off during the incident.

Don’t simply turn them back on because the fire appears to be over. Fire and rescue services advise that affected utilities should be checked by an appropriately competent person before they are brought back into use. Electrical equipment that has been exposed to fire, smoke, water or steam may also need inspection before it is used again.

Secure the property

Fires can leave windows broken, doors damaged, roof coverings open and parts of a building exposed to the weather.

Once the fire brigade has left, the property may need temporary work to keep it secure and prevent further damage. That could include boarding windows or doors, temporary roof coverings, fencing off unsafe areas or arranging emergency electrical or structural work.

This is exactly the type of situation where emergency and temporary repairs are appropriate. The aim is to protect the building and prevent things getting worse rather than beginning the full reinstatement straight away.

Contact your insurer

Notify your insurer as soon as reasonably possible.

Most insurers have emergency claims lines and can explain what they want you to do next. Depending on the scale of the fire, they may appoint a loss adjuster, forensic investigator, restoration company, surveyor or other specialist.

The Association of British Insurers advises policyholders to contact their insurer promptly after insured damage such as fire and, where emergency repairs are needed to prevent further damage, to keep receipts and speak to the insurer where possible.

Photograph the damage when it’s safe

Once you’re allowed to enter the property safely, take plenty of photographs and videos.

Capture the overall condition of each affected room as well as closer photographs of burnt, smoke-damaged or water-damaged areas. If furniture, appliances or other possessions have been damaged, photograph those too.

Don’t worry about making the photographs look tidy. At this stage you’re creating a record of the condition immediately after the incident.

That evidence can be very useful later when the property has been stripped out and people are trying to establish exactly what was damaged.

Don’t start throwing anything away

It can be tempting to start clearing the property immediately, particularly when furniture and belongings smell strongly of smoke, or are completely unsalvageable.

Unless something presents an immediate health or safety risk, speak to your insurer and restoration professionals before disposing of it.

Some items that look or smell badly affected may still be restorable, and your insurer may also want evidence of the damage before deciding how an item should be treated. The ABI specifically advises policyholders not to rush to dispose of damaged items unless they represent a health hazard.

Back to the top
02
Understand the damage

Fire, smoke and soot explained

What does fire damage actually include?

A single fire can affect a property in several ways. The survey needs to distinguish direct flame and heat damage, deposited smoke and soot, firefighting water, damage to building services and subsequent rainwater exposure. Each can require a different assessment or restoration method.

Direct fire and heat damage

Heat and flames may char timber, weaken structural components, crack glazing, melt fittings and destroy finishes. The condition of materials is not always clear from their appearance.

Smoke damage and soot residues

Smoke moves with air through stairwells, doorways, service openings, ventilation systems and concealed voids. It can carry soot and other combustion residues into rooms untouched by flames. Different materials and fire conditions produce different contamination, so the cleaning method must suit the residue and the surface. ANSI/IICRC S700 provides specialist guidance on fire and smoke restoration; its scope excludes reconstruction, which must be assessed against separate building requirements.

Firefighting water and weather exposure

Hoses or sprinklers may wet insulation, floors, ceilings and wall cavities; a damaged roof can admit rain afterwards. Concealed moisture may remain even where a surface looks dry. The drying stage explains why measurement and suitable drying may be required before reinstatement.

Why can smoke reach rooms away from the fire?

Air currents can carry fine residues upstairs, beneath doors, through ventilation and into cupboards, floor voids and openings around services. Visible soot is only one sign of contamination, so an inspection should consider the likely route of smoke through the building rather than stop at the room where the fire began.

Can smoke damage a neighbouring property?

Yes. Smoke can enter adjoining homes, flats and premises above or alongside commercial units without flames reaching them. Restoration assessments should establish how the smoke entered, where residues settled and whether rooms or building systems require treatment.

Back to the top
03
Get the right assessment

Surveys, safety checks and early mistakes

How is fire and smoke damage assessed?

Your insurer may initially appoint a specialist restoration company to assess the fire and smoke damage, before a building contractor is appointed or while you arrange your own repair quotation. Their assessment covers both the building and its contents, looking at where smoke and soot have travelled, the materials affected, the extent of contamination and any remaining odours. This may include testing for soot deposits and carrying out small cleaning trials to help establish what can be successfully restored. Furniture, clothing and other belongings may need specialist cleaning, removal for treatment or assessment for replacement.

The restoration company’s findings help establish a scope for cleaning, decontamination, deodorising and any necessary removal of materials that cannot be restored. They should also consider water damage from firefighting and whether drying is required. This work calls for specialist knowledge; relevant training and qualifications are available through the British Damage Management Association (BDMA) and the Institute of Inspection, Cleaning and Restoration Certification (IICRC). The restoration assessment then informs the building contractor’s repair scope, with the two working together where opening-up reveals further damage or contamination.

Alongside the restoration assessment, the building contractor assesses the repairs needed to reinstate the property.

The assessor needs to understand the full route of the fire, heat and smoke and consider whether firefighting or weather exposure has created additional damage.

In more significant fires, a surveyor may be appointed and a structural engineer consulted.

For example, one AIR project in Oswaldtwistle involved an extensively fire-damaged kitchen and smoke-damaged lounge. Once the roof of the kitchen extension was stripped back, additional damage was discovered to a steel girder, surrounding brickwork and a stone lintel. Those findings required a structural engineer’s report before the additional repairs could be submitted to the insurer as variations.

That’s a good example of why the first visible damage isn’t always the complete picture.

  • Where heat, flames, smoke and soot travelled, including concealed spaces
  • Roof, wall, ceiling and floor stability; early safety input from structural specialists where necessary
  • Electrical, gas, heating and plumbing safety before anyone disturbs or reuses affected services
  • Firefighting water, moisture trapped in hidden layers and whether controlled drying is required
  • Which finishes, fixtures and possessions can be restored and which need replacing
  • Evidence, room measurements, specialist reports and any causes still under investigation

Why might firefighters have opened walls or ceilings?

It can be alarming to see additional holes in walls, ceilings or floors after the fire brigade has left.

However, firefighters may need to open parts of the building to check for hidden fire spread or make sure the incident has been completely extinguished.

Cambridgeshire Fire and Rescue Service specifically notes that firefighters sometimes create openings in walls, floors and ceilings so they can check for hidden fire spread.

Those openings then become part of the eventual reinstatement.

So if your ceiling or wall has been opened during firefighting, that doesn’t necessarily mean unnecessary damage has been caused. It may have been essential to make the property safe.

What shouldn’t you do after a fire?

Once you’re allowed back into the property, it’s very easy to feel that you need to start cleaning immediately.

But some well-intentioned actions can make restoration more difficult.

Don’t scrub soot-covered walls straight away

Fire residues can behave differently on different surfaces.

Gloucestershire Fire and Rescue Service specifically advises homeowners not to attempt to wash or wipe fire residues from walls, ceilings and other absorbent surfaces before getting appropriate advice.

That’s because the wrong cleaning technique can spread residues or drive them further into porous surfaces.

Specialist cleaners will assess the type of surface and contamination before choosing an appropriate method.

Don’t switch appliances back on

Televisions, computers, boilers, kitchen appliances and other electrical items exposed to fire, smoke, water or heat should not simply be switched on to see whether they still work.

They may require electrical inspection or specialist cleaning first.

Don’t walk soot through the rest of the building

Movement through contaminated rooms can spread soot onto cleaner flooring, upholstery and surfaces.

If parts of the property are heavily affected, it may be sensible to limit access until the restoration plan is clear.

Don’t repaint before the smoke problem is resolved

Fresh paint won’t solve smoke contamination beneath it.

If residues or odour remain within the surface, they may reappear through the new finish or the smell may remain after the room looks newly decorated.

Professional fire reinstatement may therefore involve cleaning, sealing or specialist preparation before final decoration begins.

Don’t assume everything needs to be thrown away

Some contents can potentially be professionally cleaned or restored.

Furniture, textiles, documents and certain valuable belongings may be candidates for specialist restoration depending on their condition.

Equally, some items may not be appropriate to retain.

The point is to make that decision with the right information rather than clearing the entire property before it has been assessed.

Back to the top
04
The repair process

How fire and smoke damage restoration is coordinated

What are the stages of a fire damage reinstatement?

These are useful stages for understanding the work, not a rigid one-after-another programme. Investigation, surveys, contents work, specialist cleaning and drying may overlap, while later discoveries can send a project back to an earlier stage. Safety checks come before intrusive work, and approvals should be revisited as the scope develops.

Stage 1: Make the property safe and secure

Confirm that it is safe for anyone to enter. Isolate potentially damaged utilities, keep clear of unsafe areas, secure openings and arrange temporary weather protection or support where competent professionals consider it necessary. Emergency action may be required before a full claim decision.

Stage 2: Carry out initial structural and services safety checks

Before strip-out, opening-up or other intrusive activity, assess structural stability and the condition of electrical, gas, heating and water services. Where risks are indicated, involve a structural engineer, suitably qualified electrician or gas professional. These initial checks control access and work methods; more detailed testing may follow after materials are exposed.

Stage 3: Preserve evidence and investigate the cause

Fire and rescue services or the insurer may investigate the origin of the fire. Photograph the scene and clarify whether wiring, appliances or other potential evidence must be retained before clearance. Safety work can continue where essential, with actions recorded and coordinated.

Stage 4: Survey and document the full extent

Restoration specialists assess fire residues, smoke pathways, odours and wet materials; surveyors or reinstatement contractors assess building repairs. Record room measurements, photographs, contents and proposed treatment, including less visible damage. The scope may change when new areas become accessible.

Stage 5: Agree the restoration approach and necessary preliminary works

Plan controlled access, protective measures, contents removal, asbestos investigations where relevant, cleaning and drying. Acceptance of insurance cover is different from approval of a particular scope, method or cost. Obtain written authorisation for non-emergency work that the insurer is expected to fund, while preserving the emergency exception below.

Stage 6: Undertake controlled strip-out where needed

Once evidence and safety issues have been addressed and relevant approvals obtained, remove materials that cannot be restored. For example, on an AIR Singleton, Blackpool loft-fire reinstatement, the damaged roof and upper floor required substantial opening-up and repair, while smoke and firefighting water also affected other rooms.

Stage 7: Clean smoke and soot, and manage odour

Specialist methods are chosen according to residue type, surface and contamination. Cleaning, removal and odour treatment are coordinated, sometimes in repeated passes as new areas are exposed. The IICRC S700 standard covers restoration cleaning and odour management, not reconstruction.

Stage 8: Extract firefighting water and dry affected construction

Water removal and drying can run alongside cleaning or strip-out where safe. Monitor moisture in subfloors, joists, plasterboard, insulation and other concealed layers; prolonged dampness can support mould growth. Suitable moisture readings and specialist advice should inform when materials are ready for rebuilding. See the drying FAQ.

Stage 9: Reassess exposed structural elements and services

With appropriate access, engineers and competent trades can verify the full extent of damage to steels, timbers, masonry, wiring, boilers and plumbing. In one AIR reinstatement in Oswaldtwistle, Accrington, a fire originating in a consumer unit beneath the stairs caused substantial damage downstairs. The repairs included a full rewire and boiler replacement. Additional findings should be recorded and priced.

Stage 10: Confirm the repair scope, approvals and contract

Prepare an itemised reinstatement scope covering construction, services and finishes, plus any variations for concealed damage. Obtain the insurer’s written approval of the proposed costs and check any excesses, deductions and professional fees. This is separate from a decision that the underlying claim is covered. Agree the construction contract, programme and any privately funded alterations.

Stage 11: Rebuild, inspect and retain completion records

Once the building is structurally ready, appropriately cleaned and dried, complete the agreed reinstatement in coordinated trade sequence. Carry out inspections, remedy defects and retain certificates, surveys, guarantees and completion records. Keep the insurer informed if further insured damage arises and requires approval.

Emergency exception: Necessary work to protect life, make the property safe or prevent further damage may need to happen before written agreement is practical. Inform the insurer as soon as reasonably possible and keep photographs, instructions, records and receipts. Routine reinstatement should not proceed on the assumption that an insurer has approved its scope or cost.
Back to the top
05
Cleaning & odour removal

Smoke, soot and stubborn smells

What is smoke damage cleaning?

Smoke damage cleaning is the specialist process of removing residues left behind after a fire.

It’s more complicated than ordinary domestic cleaning because different fires create different residues, and different surfaces react differently to cleaning.

For example, a hard sealed surface and a porous plastered wall may require completely different treatments.

A restoration specialist may test small areas before deciding how to treat larger sections.

The aim is not simply to make surfaces look cleaner. It’s to remove fire residues effectively without unnecessarily damaging the underlying material.

Why can ordinary cleaning make smoke damage worse?

Some fire residues smear when wet.

Others can become more difficult to remove if the wrong product is used.

Absorbent materials can also take contamination deeper into the surface during aggressive scrubbing.

That’s why Gloucestershire Fire and Rescue Service guidance before professional advice has been taken.

If the fire is small and damage is genuinely superficial, some ordinary cleaning may eventually be appropriate.

But on a significant insured loss, it makes sense to let restoration specialists assess the residue before everybody reaches for the household cleaner.

What is soot blasting?

Specialist blast cleaning can be suitable for some fire-damaged materials when conventional cleaning is insufficient. The blast medium and method must be selected for the substrate, with suitable protective measures and containment. This is specialist work rather than something a homeowner should attempt themselves.

Why can smoke smell remain, and how is it removed?

Smoke residues can remain on porous materials or in concealed places such as beneath floors, within wall cavities and above ceilings. A room can look clean while still smelling of smoke, but the absence of an odour does not, on its own, demonstrate that the property is safe or free of contamination.

Effective deodorisation starts with identifying the source. Specialists may need to inspect concealed areas, clean or remove affected materials and then use appropriate odour-treatment equipment and methods. Simply masking the smell or applying sealers before adequate preparation may leave the cause unresolved. IICRC S700 covers restoration cleaning and odour management, not building reconstruction.

For example, an AIR client’s home above a bakery suffered extensive smoke damage following a fire downstairs. An initial deodorising treatment reduced the smell but did not resolve it; further contaminated material beneath the flooring had to be addressed before reinstatement could be completed.

If odour returns after the work, record it and raise the concern promptly with the contractor and insurer so remaining sources can be investigated, rather than relying on fragrance to cover the smell.

Can you simply seal smoke damage with paint?

Sometimes specialist sealers and blocking coatings form part of the final repair, but they shouldn’t be used as a substitute for cleaning and proper preparation.

If heavy soot and residues are left on a wall and simply painted over, there’s a risk of staining or odour continuing to cause problems.

The correct preparation depends on the surface and severity of the contamination.

After proper cleaning, a specialist stain-blocking or odour-blocking coating may be specified before the final decorative finishes are applied.

The important part is the order: clean and prepare first, then seal or decorate where appropriate.

See why smoke odour can persist and how it is treated for the restoration approach.

Can smoke get under flooring and behind walls?

Yes. Smoke and fine residues can enter gaps around boards, service penetrations and concealed cavities. Where tests or continuing odour indicate hidden contamination, specialists may need limited access to inspect and clean. The aim is targeted investigation, not automatically removing every finish.

Can smoke damage electrical equipment?

Potentially, yes.

Electrical items can be affected by a combination of smoke residues, heat and firefighting water.

Smoke damage to electrical items is not always visible from the outside. Depending on what has burned, smoke gases and deposited residues can cause corrosion of metal contacts, terminals and electronic components, particularly where moisture is also present. In light fittings, this may affect lamp holders, electrical connections and the circuitry within LED drivers or fluorescent ballasts. Some deposits can also create unwanted conductive paths, leading to electrical faults.

An item that still works immediately after a fire should therefore not automatically be assumed to be unaffected, as corrosion-related deterioration can develop later. Smoke-exposed fittings and equipment should be assessed by an appropriately qualified electrician or specialist, with manufacturer advice where necessary, to determine whether they can safely be cleaned and retained or require replacement.

Fire service guidance recommends that electrical appliances exposed to fire, smoke, water or steam should not be used until they have been checked where necessary.

Whether an item can be professionally cleaned or needs replacing will depend on its condition, value and the nature of the contamination.

For building wiring and fixed electrical installations, an appropriately qualified electrician should determine what can safely remain in service.

Can a boiler survive smoke damage?

Possibly, but it depends entirely on the circumstances.

A boiler located well away from a very small fire may be unaffected, while one exposed to heavy smoke, heat or water will require specialist assessment.

You shouldn’t assume a boiler needs replacing simply because there was a fire somewhere in the property, but neither should it automatically be put back into use if it has been heavily exposed.

Back to the top
06
What can be repaired?

Roofs, rooms, services and belongings

What happens to walls and ceilings after a fire?

Walls and ceilings can suffer several different types of damage.

Direct heat and flame can destroy plasterboard or plaster, while smoke may leave residues and odours on areas well beyond the fire itself.

Firefighting water can then add saturation, staining or damage to ceilings and wall linings.

The repair might therefore involve a mixture of specialist cleaning, removal of badly damaged materials, structural drying, replacement plasterboard, plastering, stain blocking and full redecoration.

Where the ceiling or wall structure has been opened by firefighters while checking for hidden fire spread, those openings also need to be reinstated.

The correct repair depends on what actually happened to the construction rather than simply what colour the surface has become.

What happens to flooring after a fire?

Flooring needs to be assessed for direct heat damage, smoke and soot contamination, and water from firefighting. The assessment should establish whether the floor can be cleaned and restored, whether individual areas need repairing, or whether replacement is necessary.

For carpets, this means considering the pile, backing and underlay—not just visible surface staining. Specialist cleaning may restore some smoke-affected carpets, but scorching, persistent contamination or damage to the backing may make replacement necessary. Underlay and the floor beneath may also require separate treatment.

Timber flooring can swell, cup or buckle when exposed to firefighting water. Some floors may recover sufficiently after controlled drying to allow repair or refinishing, while others remain permanently damaged. Laminate may also swell at its edges or joints. Decisions should take account of moisture readings and the condition of the flooring and subfloor, rather than assuming that a dry-looking surface means the whole construction is dry. Check concealed subfloor and underlay moisture too; damp trapped beneath apparently dry flooring can support mould growth. See the drying FAQ.

Tiles and other hard finishes may be suitable for cleaning and retention, but an apparently intact surface does not establish that the layers beneath are sound. Where water penetration, heat damage or concealed contamination is suspected, sections may need lifting to inspect the substrate and allow cleaning, drying or repairs.

Smoke residues and odours can also remain in gaps, beneath floor coverings or within floor voids. Persistent odour should prompt investigation of the source rather than repeated surface treatment alone. Before flooring is reinstated, the underlying construction should be suitably clean, sound and dry for the chosen floor finish.

What happens to a kitchen after a fire?

Even a fire that starts in a relatively small area of the kitchen can affect units, worktops, appliances, electrical installations, flooring, ceilings and adjoining rooms. Heat may distort doors and units, smoke can contaminate surfaces throughout the room, and firefighting water may damage flooring and the structures beneath it.

The repairs may range from specialist cleaning and replacement of individual damaged components to complete kitchen reinstatement, depending on the extent of the damage and what can safely and effectively be restored.

Matching becomes an issue where the original kitchen range or colour has been discontinued. However, damage to one plinth, cupboard door or unit does not automatically mean the insurer will pay for a whole new kitchen. Many buildings policies contain a “matching sets” or “pairs, sets and suites” clause that excludes replacement of undamaged items solely to maintain a matching appearance.

Policies differ: some include matching-items cover or provide a contribution towards replacing undamaged parts. Where a genuine loss of match remains, the Financial Ombudsman may also consider compensation appropriate, depending on the circumstances. This is not an automatic entitlement to full replacement. Read the Financial Ombudsman’s approach to matching sets and settlement.

A detailed repair scope should distinguish between components that are damaged or cannot reasonably be retained during the necessary repairs, and undamaged items proposed for replacement only to achieve a match. The extent of the damage, available restoration options and the policy wording should inform the work submitted to the insurer for approval.

What happens to windows and doors after a fire?

Heat can crack glazing, distort plastic frames, scorch timber and damage door hardware.

External fires can cause substantial damage to windows and building finishes even where the fire doesn’t penetrate far inside.

AIR’s office-fire project for First Choice Alarms is a good example. A fire outside the building blackened plastic window frames, cracked double glazing and damaged render, fascias, guttering and rainwater goods. The resulting repair involved several different trades despite the fire being outside the main office accommodation.

Windows and doors may also be damaged during emergency access or firefighting, which then creates an immediate security issue that needs dealing with before permanent replacement is arranged.

What happens if the roof is damaged by fire?

A roof fire can affect much more than the tiles or slates. Rafters, roof trusses, supporting beams, connections, roofing membranes, insulation and ceilings may all be damaged by heat, flame, smoke or firefighting water. The assessment needs to establish which parts remain structurally sound and which require repair or replacement.

Where structural damage is suspected, a structural engineer should assess the affected roof and its supports and specify the necessary work. A roof that remains standing should not automatically be assumed safe. Temporary support or controlled removal of unstable sections may be needed before restoration and rebuilding can proceed.

If the roof is open to the weather, temporary protection should be arranged as soon as it can safely be installed. Depending on the damage and likely repair period, this may involve temporary coverings or a scaffold-supported temporary roof. Preventing further rainwater entering helps limit additional damage to the rooms and structures below.

Some fires allow localised roof repairs; others require substantial or complete rebuilding. Retained areas may also need smoke cleaning and drying. The repair specification should address the roof covering, structural supports, insulation, ventilation and any affected fire separation, including junctions with neighbouring properties.

Substantial roof repairs or replacement may require Building Regulations approval and improvements to insulation where applicable. These requirements should be established with the designer and building control before the specification and costs are finalised, so that the proposed reinstatement reflects both the fire damage and the requirements applying to the work.

Can furniture and personal belongings be restored after a fire?

Many items can be restored, but the decision requires a specialist assessment of their materials, condition and exposure to heat, smoke residues and firefighting water. Surface appearance alone is insufficient: contamination may affect upholstery fillings, joints and other concealed areas. Cleaning methods must suit the material and its finish, with checks after treatment to assess the outcome.

A contents restoration company can prepare an itemised inventory, supported by photographs, identifying items suitable for restoration, those requiring further specialist investigation and those recommended for replacement. Where an item is described as beyond economical repair (BER), the report should explain why restoration would be uneconomic. This is different from an item that cannot be restored safely or satisfactorily. Items of particular sentimental value should be highlighted before decisions are made.

Depending on the damage, treatment may include specialist cleaning and deodorisation of sofas and other upholstered furniture, or cleaning, repair and refinishing of wooden furniture. The restoration company may arrange additional expertise, such as a French polisher, furniture restorer or specialist in documents and artwork. The appropriate treatment depends on the individual item; cleaning alone will not remedy scorching, distortion or damaged finishes.

Contents may be treated on site or removed for cleaning and secure off-site storage while the property is repaired. Items should be recorded, labelled and suitably packed, with their condition and movements documented. The proposed treatment, transport arrangements, storage period and associated costs should be agreed as part of the restoration plan.

Your insurer may appoint its own restoration specialist, but you can also seek independent restoration advice. If you have a loss assessor, they may introduce a suitable company. Where assessments differ, compare the inspection findings, proposed treatments and reasons for recommending restoration or replacement. An independent report is not automatically more thorough, but it can provide additional evidence for discussion with the insurer.

Before commissioning additional services, confirm who will pay for them. Photograph damaged possessions and agree disposal with the insurer before discarding items, unless urgent action is necessary for safety.

What about food and medicines after a fire?

Food and drink affected by heat, smoke or firefighting water should be discarded. Packaging that appears intact does not establish that the contents are safe: fire and rescue guidance also advises against using canned food exposed to heat.

Do not use medicines that may have been damaged or contaminated. Contact your pharmacist for advice on safe disposal and arranging replacements, particularly if you need medication regularly. Potentially affected prescription medicines should be returned to a pharmacy for safe disposal.

Where safe and practical, photograph affected items and make a brief inventory for your contents claim before disposal. Recording the loss should not delay the removal of unsafe food or obtaining essential replacement medication.

Back to the top
07
Insurance explained

Fire damage insurance claims and cover

Is fire and smoke damage covered by home insurance?

Fire is a standard insured risk in most home insurance policies. Buildings insurance generally covers damage to the structure and permanent fixtures, while contents insurance covers insured belongings. Cover for fire is usually included without needing the optional accidental-damage extension.

However, an insured fire does not automatically mean every proposed repair or replacement will be paid for. The insurer will assess whether the damage resulted from the insured event, what work is necessary and how the policy provides for settlement. The excess, cover limits, exclusions and any applicable underinsurance provisions can affect the amount payable.

Check both your policy wording and schedule. If the insurer declines part of the claim or proposes a reduced settlement, ask it to explain the decision in writing, identifying the relevant policy terms and the evidence supporting its position.

Does insurance cover smoke damage as well as the burnt room?

Smoke damage resulting from an insured fire will normally be considered as part of the claim, including damage in rooms that were not directly affected by flames. The assessment should establish the extent of contamination and the treatment required, rather than limit repairs to the room where the fire started.

The proposed work may include specialist cleaning and deodorisation, removal of materials that cannot be satisfactorily restored, and reinstatement of affected building finishes. Replacement should be supported by evidence explaining why cleaning or repair would be insufficient; equally, a surface that looks relatively clean should not automatically be treated as unaffected.

Photographs, restoration reports, cleaning trials and a detailed repair scope can help establish what work is necessary. Where the insurer and your appointed specialists disagree, ask which findings or repair recommendations are disputed and why.

What’s the difference between buildings and contents insurance after a fire?

Buildings insurance generally covers the structure and permanent fixtures, including the roof, walls, ceilings, fitted kitchen units and bathroom suite. Contents insurance generally covers belongings such as furniture, clothing, curtains and freestanding appliances.

Some items, particularly floor coverings and fitted appliances, require a closer check of the policy definitions. Do not assume that everything attached to the property falls under buildings insurance.

A substantial fire may therefore involve separate buildings and contents claims, sometimes with different insurers. In rented accommodation, the landlord normally arranges buildings insurance, while tenants arrange cover for their own belongings.

How does a fire damage insurance claim work?

Fire claims can involve investigations into the cause of the fire as well as detailed assessments of the damage and the work needed to restore the property.

The process usually starts with the insurer gathering information about what happened and deciding what immediate support is required. Depending on the severity of the loss, it may appoint a loss adjuster, fire investigator, surveyor or restoration specialist. Emergency work may be needed to make the property safe, secure it and prevent further damage.

Restoration specialists assess smoke contamination, cleaning requirements and any drying needed. Building contractors and, where necessary, surveyors or structural engineers assess the repairs required. Their findings help establish a detailed scope of work and the costs to be submitted for insurer approval.

Major claims may require additional reports or revisions to the scope, particularly where strip-out reveals concealed damage. Any additional work should be documented and submitted for approval, with urgent safety measures addressed separately.

Once the necessary restoration and drying have been completed, the building is ready and the relevant repair work has been agreed, reinstatement can proceed.

Two separate decisions are needed: written confirmation that the insurer accepts the claim under the policy, and written approval of the proposed scope of non-emergency works and associated costs. Appointment of an adjuster, or acceptance of cover, does not automatically authorise every item in a repair quotation. Keep the exception for urgent measures needed to protect people or prevent further damage, which should be documented and notified promptly.

How to raise an insurance complaint or contractor dispute

If you disagree with the insurer about policy cover, settlement, unnecessary delay or claim handling, follow your insurer’s formal complaints procedure in writing. If unresolved, eligible complainants may refer the matter to the Financial Ombudsman Service, subject to its complaint time limits. The FOS also explains who is eligible, including the criteria for some smaller businesses: not every commercial customer qualifies.

If the problem concerns workmanship by a contractor you appointed yourself, it may instead be a contractual dispute under your building agreement, rather than an insurance complaint within the FOS’s remit. If the insurer appointed, arranged or controlled the repairer, tell the insurer about workmanship concerns as part of your complaint. Keep the relevant contract, inspection reports, photographs and correspondence.

Why might the cause of the fire need investigating?

A fire investigation aims to establish the origin—where the fire started—and the cause—how it ignited. The findings can help identify continuing safety risks, inform the insurer’s assessment of policy cover and establish whether another party may be responsible.

Depending on the circumstances, investigations may involve the fire and rescue service, the police or forensic fire investigators and engineers appointed by the insurer. They may examine the scene, electrical installations and appliances, review witness accounts and arrange laboratory examination of recovered components. An important part of the assessment is distinguishing a defect that caused the fire from damage caused by the fire itself.

For insurers, there are two separate questions: whether the loss is covered under the policy, and whether they can recover their expenditure from a responsible third party. For example, evidence may indicate that a defective appliance, negligent electrical installation or other faulty workmanship caused the fire. If legal responsibility can be established, the insurer may pursue recovery from the manufacturer, installer or another responsible party. This process is known as subrogation. The presence of a suspected fault alone does not establish liability.

Not every investigation reaches a definite conclusion. Fire can destroy the evidence needed to identify the ignition source, and several possible causes may remain. AIR has worked on several reinstatement projects where the precise cause was not conclusively established. An undetermined cause does not automatically prevent an insurance claim from being accepted: the decision depends on the available evidence and the policy terms.

Before cleaning, strip-out or disposal begins, confirm whether investigators need to inspect the scene or retain particular items. Appliances, wiring and other potential evidence should not be dismantled or discarded without agreement. Urgent work to make the property safe should be coordinated with the insurer and relevant specialists, with the original condition and any necessary changes recorded wherever possible.

What is a loss adjuster?

A loss adjuster is a claims specialist, normally appointed and paid by the insurer to investigate the circumstances of a loss, assess the damage and consider the claim against the policy terms.

On a fire claim, their work may include inspecting the property, reviewing fire investigation and restoration reports, checking the sums insured and examining the proposed repair scope and costs. They may request further evidence, discuss repair methods and negotiate costs with contractors. They may also help coordinate emergency measures and other support available under the policy.

The adjuster reports to the insurer and may make recommendations about cover and settlement. Some have delegated authority to agree particular decisions or costs; others need the insurer’s approval.

Although appointed by the insurer, the adjuster should assess the claim objectively and fairly. They may be your main contact throughout the claim, but they are not your independently appointed representative.

What is a loss assessor?

A loss assessor is appointed by you, the policyholder, to prepare and manage the claim on your behalf.

Their role may include reviewing the policy, documenting the loss, arranging supporting specialist reports and presenting the claim to the insurer. They can liaise with the loss adjuster, review proposed repair scopes and negotiate the settlement available under the policy.

Not every fire claim requires a loss assessor. You may be comfortable managing a straightforward claim yourself. Independent representation can be particularly useful where the damage is extensive, the scope or settlement is disputed, or you need help managing the evidence and negotiations.

Before appointing an assessor, obtain written details of their services, fees and any conditions attached to the appointment, including arrangements involving recommended contractors. Check their relevant FCA authorisation or permissions rather than assuming that professional membership alone is sufficient.

A loss assessor can manage the insurance claim on the policyholder’s behalf, while a contractor or surveyor prepares the building repair scope and administers or carries out the agreed reinstatement.

Who prepares the scope of work for fire damage repairs?

The scope of work sets out what needs to be cleaned, removed, repaired or replaced, and how the building will be reinstated. Who prepares it depends on the complexity of the damage and how the repairs are being arranged. It may be a building surveyor, an experienced reinstatement contractor or the insurer’s appointed surveying or repair team. The loss adjuster may arrange and review the scope, but their appointment does not necessarily mean they will prepare the detailed building specification themselves.

For extensive or technically complex fire damage, a suitably experienced chartered building surveyor may be appointed to assess the building and prepare a schedule of works, drawing on restoration reports and structural or services advice where necessary. The surveyor may then obtain competitive tenders, allowing contractors to price the same specification rather than submit quotations based on different assumptions.

Many buildings policies include cover for necessary professional fees associated with repairing insured damage, such as surveyors’, architects’ and engineers’ fees. However, the services required, appointment and fees should be agreed with the insurer before costs are incurred. Cover for reinstatement-related professional fees is different from cover for preparing or negotiating the insurance claim.

Where appointed to administer the building contract, the surveyor may also act as contract administrator. Depending on the contract and their appointment, this can include issuing instructions, inspecting progress, assessing changes and certifying payments. The contractor submits queries and proposals through the agreed contractual process. This provides technical oversight, although the contractor remains responsible for carrying out the work properly.

On more straightforward claims, an insurer-appointed contractor may prepare the scope and quotation, or the insurer may ask you to obtain quotations from your own contractors. A useful quotation should identify the affected rooms and building elements, proposed repair methods, quantities and any exclusions or assumptions. Comparing headline prices alone can be misleading if the contractors have allowed for different amounts of work. Where the damage is extensive or the proposals differ materially, ask whether professional surveying input is needed.

The scope may change as strip-out reveals concealed damage. A variation is a change to the agreed work, which may affect both cost and completion time. A provisional sum is an allowance for work that cannot yet be fully specified or priced; it is adjusted when the requirements and actual cost are established.

Additional damage should be photographed and explained, with supporting specialist advice where needed. Where there is a contract administrator, the contractor should submit the findings and proposed costs for review and formal instruction under the contract. Any necessary insurer approval must also be obtained: a contract instruction and agreement to fund the additional work are separate matters.

Do I have to use the insurer’s fire repair contractor?

Not necessarily.

Many insurers have their own approved contractor networks and may offer to arrange the repairs for you.

That can be convenient.

But depending on your policy and the way the claim is being settled, you may also be able to put forward your own contractor.

The ABI has previously advised that homeowners with a preferred tradesperson can discuss this with their insurer, with repair costs agreed before work takes place.

The key point is that a policyholder may be able to propose their preferred contractor, subject to the policy terms, repair arrangements and the insurer’s agreement to the scope and costs.

If you want to use your own fire damage repair contractor, raise it early in the claim.

What experience should a fire reinstatement contractor have?

Ask for examples of comparable jobs, appropriate insurance and a clear programme and contract. The objective is to understand who takes responsibility for each part of the process, rather than assume that general building experience covers specialist restoration.

Fire reinstatement can involve structural advice, specialist smoke restoration, controlled drying, insurance documentation and several trades. A contractor familiar with insured losses should be able to explain how it works with surveyors, restoration specialists and competent service engineers, how additional damage is recorded and how changes are agreed before work proceeds.

Back to the top
08
Planning the works

Contractors, settlements, cost and timescales

What should I ask a fire damage contractor?

Before appointing a contractor, establish their experience, who will manage the project and how the work will be agreed and paid for. For a substantial reinstatement, the following questions are particularly useful.

Have you completed comparable fire repairs?

Ask for examples and references from projects of similar complexity. Establish who assesses structural damage, who coordinates smoke restoration and drying, and who manages the specialist trades. Electrical, gas and structural work should be undertaken by appropriately competent professionals.

Can I see evidence of your insurance?

Request current insurance certificates and relevant schedules, including public liability and employers’ liability where applicable. Ask how the works and existing building will be insured during repairs, and whether professional indemnity cover is needed for any design responsibility. Check the arrangements with your buildings insurer: public liability insurance alone does not cover every construction risk or guarantee workmanship.

What written contract will we use?

Confirm who is appointing the contractor and enter into an appropriate written agreement before permanent reinstatement begins. This should incorporate the scope, price, programme, payment terms and arrangements for changes and disputes. A suitable JCT contract may be appropriate; on larger projects, a surveyor can advise on the form and administer it. Insurer approval of a quotation is separate from the building contract.

What are the payment arrangements?

Agree any deposit, stage payments, payment deadlines and how progress will be valued. Establish whether the insurer pays the contractor directly or pays you, and who is responsible if insurance payments are delayed. Record your excess, privately funded upgrades and any retention expressly agreed in the contract.

What is the programme, and what could delay it?

Ask for the proposed start date, anticipated duration and key milestones. Identify dependencies such as completed drying, insurer approvals, statutory consents and material deliveries. Agree how delays and revised completion dates will be communicated.

How will materials and finishes be selected?

Record specifications, allowances and selections for kitchens, flooring, doors, sanitaryware and decoration. Agree samples or product references before ordering, with written approval for substitutions. Identify any additional cost of your preferred choices before committing to them.

How will changes and additional damage be handled?

Ask how concealed damage, provisional sums and variations will be documented, priced and authorised. Follow the scope and variation process described earlier in this guide, including any contract-administrator instructions and necessary insurer approval.

What happens at completion—or if something goes wrong?

Establish who inspects the work, records outstanding defects and agrees their correction. Ask which certificates, approvals, warranties and operating instructions will be supplied. Confirm the complaints procedure and contractual dispute process. Raise problems promptly in writing; where the insurer appointed the repairer, notify the insurer as well.

Finally, agree your main contact and the frequency of updates. Clear responsibilities and written decisions help prevent misunderstandings throughout a lengthy repair.

What happens if the insurer offers a cash settlement?

A cash settlement means the insurer pays an agreed amount for insured damage rather than arranging the repairs itself. It can give you flexibility over contractors and the timing of the work, but it also means taking responsibility for organising the reinstatement. On a substantial fire claim, that is a significant undertaking.

Check the scope before judging the amount

Ask for the detailed scope and cost breakdown behind the offer. Compare these with a quotation from a contractor experienced in fire reinstatement—not simply with a headline estimate.

Check that the proposal accounts for the necessary investigation, strip-out, smoke treatment, drying, structural repairs, services and finishes. Access equipment, waste removal, temporary protection and necessary professional fees can also be substantial costs. A large-looking settlement can still leave a shortfall if essential work has been omitted or allowances are unrealistic.

Understand whose repair costs have been used

There is an important distinction between the insurer choosing to settle in cash and you requesting cash instead of a satisfactory repair offer. Where the insurer chooses cash, the FOS expects the amount to reflect your repair costs. If you decline a fair repair offer and request cash, the payment may instead be limited to what those repairs would have cost the insurer. Its negotiated contractor rates may be lower than prices available to you.

Clarify VAT and deductions

Establish whether the figure includes VAT, your policy excess and any other deductions. If VAT is being withheld until incurred, obtain written confirmation of how it will be reimbursed and what evidence is required. Also clarify whether necessary professional fees are included or dealt with separately.

Do not assume hidden damage can be added later

Fire damage is not always fully understood before opening-up and specialist investigations. Ask what will happen if further insured damage is discovered, or if provisional allowances prove insufficient.

Read any “full and final settlement” wording carefully. It may be intended to conclude the agreed claim, making further payment disputed or difficult to obtain. Confirm exactly what is being settled and whether unresolved investigations, additional damage or other claim expenses remain open. Where significant uncertainty remains, ask whether an interim payment can be made while the outstanding matters are assessed.

Consider the practical responsibility

You may need to appoint contractors, coordinate specialists, agree finishes, manage payments and deal with defects. Confirm how alternative accommodation will be handled while the repairs proceed, including applicable limits and any proposed end date.

Before accepting, obtain a sufficiently detailed repair assessment and written clarification of the settlement terms. An experienced loss assessor can help review the claim and negotiations; a suitably appointed surveyor can advise on the technical scope. A cash settlement can work well, but the decision should rest on whether the agreed funding and arrangements are sufficient to complete the necessary repairs.

How much can a fire damage claim cost?

Where fire, smoke and firefighting water affect much of a house, the total insurance claim can substantially exceed £100,000. The building does not have to be completely destroyed for costs to reach this level. Reinstatement is only one part of the overall loss: specialist treatment, contents handling, professional input and months of alternative accommodation may also be required.

Costs extend beyond the building repairs

Before rebuilding begins, the property may need securing, temporary weather protection, structural support, investigation, strip-out and drying. Smoke residues may require specialist chemical cleaning or controlled abrasive or blast cleaning, depending on the contamination and the surfaces involved.

The reinstatement itself may include roofing, structural repairs, electrical and heating installations, insulation, plastering, kitchens, bathrooms, joinery, flooring and decoration. Scaffolding, waste removal and necessary surveying, engineering and contract-administration services add further costs.

The insurer’s own loss-adjusting and investigation expenses are part of its claims-handling expenditure. These should be distinguished from repair-related professional fees that may be covered under the policy.

Asbestos can add specialist work

Buildings constructed or refurbished before 2000 may contain asbestos, including in some soffits, roofing products, insulating boards and textured coatings. Before intrusive repairs disturb potentially affected materials, a suitably scoped refurbishment or demolition survey may be required. See the HSE’s asbestos survey guidance.

Identified materials may need controlled removal and disposal before the affected repairs proceed. Higher-risk work requires an HSE-licensed contractor; other work may fall into non-licensed or notifiable non-licensed categories. Surveying, removal and any necessary air testing or clearance procedures can add cost and affect the programme.

Contents and accommodation are separate expenses

Under the relevant cover, contents specialists may need to inventory possessions, assess which can be restored, record items recommended for disposal and arrange packing and transport. Cleaning, furniture restoration, replacement possessions, disposal and ongoing off-site storage can all contribute to the overall claim.

If the home is uninhabitable, alternative accommodation may be needed throughout restoration and reinstatement, subject to policy limits.

Why this matters for underinsurance

Where your policy requires a buildings sum insured, it should reflect the full rebuilding cost- not the purchase price or market value. The assessment needs to allow for relevant demolition, site clearance, professional fees and statutory requirements. Contents require their own appropriate level of cover; the different parts of the claim should not simply be added into one buildings figure.

Underinsurance can affect a partial-loss claim as well as a total rebuild. Where an average clause applies fairly, an insurer may reduce payment in proportion to the shortfall, even when the repair claim is below the stated sum insured. The FOS underinsurance guidance explains the approach to average clauses.

In AIR’s recent experience, insurers and loss adjusters are scrutinising rebuilding values and potential underinsurance more closely. If underinsurance is alleged, ask for the calculation, supporting valuation and the policy wording relied upon before accepting a reduction.

This is one situation where an experienced independent loss assessor can be particularly valuable. They can review the policy wording, schedule and endorsements to establish whether an average clause applies and whether any tolerance provision or waiver limits its use. Some policies allow a specified margin of underinsurance before average applies; others waive average subject to particular conditions. These protections must be checked against the actual policy rather than assumed.

An assessor can also arrange appropriate surveying evidence to examine disputed rebuilding costs and present a reasoned challenge to unsupported measurements, specifications or allowances. For consumer policies, they can consider whether the insurer asked clear questions about rebuilding costs and provided adequate guidance when the cover was arranged.

The purpose is to establish the settlement properly due under the policy and applicable rules. A loss assessor cannot guarantee that a valid underinsurance deduction will disappear, but they can help ensure that the insurer’s calculation and interpretation are examined and that relevant protections are not overlooked.

How long does fire damage claim reinstatement take?

A localised fire repair may be completed within weeks, but extensive damage can require many months. In AIR’s experience, it is not uncommon for major house-fire projects to take more than a year from the incident to completed reinstatement and the policyholders moving back home. This is a practical observation from our projects, rather than a standard timescale for every claim.

The overall period includes much more than construction. Fire investigations, structural inspections, asbestos assessment, strip-out, smoke treatment and drying may be needed before the reinstatement specification can be finalised. The claim also requires assessment of the proposed work and agreement of the funding.

Some activities can overlap, while others depend on earlier findings. Opening up the building may reveal concealed damage requiring further specialist advice and revised approval. Necessary statutory permissions, contractor availability and delivery times for windows, kitchens or structural components can also affect the programme.

Does the insurer have a deadline?

There is no single fixed deadline for settling every fire claim or completing the repairs. Insurers must nevertheless handle claims promptly and fairly, provide appropriate information about progress and settle promptly once settlement terms are agreed.

The Financial Ombudsman Service assesses repair delays according to the circumstances, including the complexity of the work and who caused the delay. A lengthy project is not automatically evidence of poor handling, but avoidable inactivity, missed appointments and unexplained approval delays should not simply be accepted as inevitable. See the FOS guidance on repairs and claim settlement.

How can you keep track of progress?

Ask for a programme that distinguishes investigation, restoration, claim approvals and building reinstatement. For each outstanding stage, establish what is needed, who is responsible and when the next action is expected. Completion dates should be reviewed as the scope becomes clearer, with changes explained.

If you cannot live at home, review alternative accommodation arrangements alongside the repair programme. Check the policy limits and tell the insurer promptly if delays threaten to exhaust the available cover. Where unnecessary insurer-caused delays lead to additional accommodation costs, the FOS may require support beyond the policy limit, depending on the circumstances.

If progress stalls, request a written explanation and action plan. Where concerns remain unresolved, use the insurer’s formal complaints procedure rather than relying solely on repeated requests for updates.

A disagreement with a contractor you appointed yourself may instead be a contractual building dispute, to be taken up with the contractor under the written contract and any applicable dispute procedure. It is not automatically a complaint the FOS can determine. Responsibility can depend on who appointed or controlled the repairer, so clarify that distinction with the insurer and retain the contract, photographs and correspondence before considering independent legal or construction advice.

If the concern is about the insurer’s decision, claim handling, settlement, delay or work by a repairer it appointed or controlled, raise a formal written complaint with the insurer. For most complaints, you can then ask the Financial Ombudsman Service (FOS) to look at the matter if you are unhappy with its final response or have not received one within eight weeks, subject to the applicable rules and time limits. The FOS explains its approach to disputes about home-insurance settlements and repairs.

What if a claim or repair dispute is not resolved?

Back to the top
09
Your circumstances

Living arrangements, landlords and businesses

Can I live in my home after a fire?

Sometimes, but many significant fire losses make the property unsuitable to occupy.

Even if one part of the building looks relatively unaffected, there may be smoke contamination, unsafe electrics, structural concerns, broken windows, no heating or hot water or large areas of the home stripped back for repair.

The presence of a strong smoke odour can also be an indication that fire residues remain within the building, which may mean further restoration is required before normal occupancy. The IICRC fire-restoration standard treats odour and residue assessment as an important part of determining the condition of a fire-affected property. See the standard’s scope.

Whether it is reasonable to remain in the property should therefore be based on the actual condition of the home rather than whether the fire was confined to one room.

Will insurance pay for alternative accommodation?

Buildings insurance commonly includes alternative accommodation where the home has been damaged and is uninhabitable while repairs are being completed.

The ABI specifically lists alternative accommodation among the costs buildings insurance may cover when a home cannot be lived in during repairs.

The amount available and the arrangements differ between policies, so check your limits and speak to your insurer before making long-term commitments.

On a major fire claim, alternative accommodation can become a significant part of the overall recovery period.

What if I live in a flat?

Fire damage in a flat can involve several insurance policies and several different parties.

There may be a block buildings policy arranged by the freeholder or managing agent, while your own contents insurance deals with your belongings.

If the fire starts in another flat or commercial unit, questions may also arise around the source of the fire and the responsibilities of different parties.

But the practical first steps remain the same.

Make sure the property is safe, notify the appropriate insurer and managing agent, photograph your damage and establish who is dealing with the building reinstatement.

What if I’m a landlord?

A fire in a rented property involves both an insurance claim and decisions about the tenancy. Notify your insurer promptly, arrange necessary safety and security measures, and keep the tenant or managing agent informed about access, investigations and the proposed repairs.

Establish what each policy covers

Landlord buildings insurance generally covers insured damage to the structure and permanent fixtures. Furniture and appliances supplied by you may fall under landlord contents cover. The tenant’s belongings would normally be dealt with through their own contents insurance.

Coordinate access and contents removal before strip-out begins. Tenants’ possessions should not be discarded without appropriate agreement simply because the building needs clearing.

What happens if the tenant cannot remain?

Check the tenancy agreement and insurance policy separately. Some landlord policies provide loss-of-rent cover without covering alternative accommodation. Others provide accommodation cover, or both, subject to conditions and limits.

Where rent is suspended under the tenancy or by agreement, the tenant may arrange and pay for accommodation elsewhere while the landlord claims eligible lost rent. However, loss-of-rent cover does not automatically entitle the tenant to stop paying. Record the agreed rent arrangements in writing and confirm the insurance position.

In England, private landlords do not usually have an automatic obligation to find alternative housing after a fire. Nevertheless, the tenancy agreement, circumstances and applicable law may create additional responsibilities. Different arrangements can apply to social housing and elsewhere in the UK.

If alternative accommodation is covered, ask the insurer who will arrange it, which costs are approved and how long support can continue. Agree whether the landlord, managing agent, tenant or insurer will coordinate the arrangements before anyone makes financial commitments.

Even where there is no obligation to arrange housing, landlords and agents may choose to help tenants find somewhere suitable or access available support. Make clear which assistance is voluntary and what costs have been agreed.

Keep the tenancy and repair arrangements clear

The tenant moving out does not automatically end the tenancy or the landlord’s responsibilities. Record the temporary arrangements, access to belongings, anticipated repair period and the tenant’s right to return. Seek housing advice before agreeing to terminate the tenancy or where rent and rehousing responsibilities are disputed.

Before reoccupation, confirm that necessary repairs, safety checks and applicable approvals have been completed.

What if I’m a tenant?

Contact your landlord or managing agent promptly and notify your contents insurer if your belongings have been damaged. The landlord’s buildings insurance does not normally cover your furniture, clothing or other personal possessions.

Once access is confirmed safe, photograph affected belongings and prepare an inventory. Obtain advice before disposing of items: your insurer may need evidence of the damage, and some possessions may be suitable for specialist restoration.

Arrange clearance of your belongings

Moving out does not automatically transfer responsibility for your possessions to the landlord or building contractor. Do not assume that smoke-damaged furniture or other belongings can simply be left for the repair team to dispose of.

Agree with the landlord or managing agent which areas must be cleared for inspection, cleaning, drying and building repairs. On an extensive reinstatement, this may mean removing all your contents, including items in lofts, cupboards, under-stairs spaces and other storage areas- not just furniture in the main rooms.

If you have contents insurance, ask whether it covers assessment, packing, removal, cleaning, disposal and storage, and who will organise these services. If you are uninsured, discuss practical arrangements and costs with the landlord or managing agent before work begins. Do not enter unsafe areas or attempt hazardous clearance yourself.

Record who will remove each category of belongings, who will pay and when clearance must be completed. Keep an inventory of items removed for storage or treatment, and give clear written agreement for disposal of your possessions.

The landlord’s building reinstatement arrangements do not automatically include clearing, storing or disposing of tenants’ contents. Any separately arranged clearance needs an agreed scope, authorisation and payment arrangements. Belongings left in work areas can prevent repairs from starting or cause delays.

Clarify your temporary move

If you need to leave while repairs take place, agree the rent arrangements, access to possessions and your right to return in writing. A temporary move is different from ending the tenancy; do not assume either that the tenancy has ended or that rent automatically stops.

What if my business has suffered fire damage?

A commercial fire can affect the building, stock, equipment and your ability to trade. While dealing with the physical damage, you may also be trying to retain customers, support staff and keep the business operating from temporary premises.

Notify your insurer or broker promptly and establish who is managing each part of the claim. If you lease the premises, involve the landlord or managing agent and clarify responsibility for the structure, tenant-installed fittings and internal repairs.

Business interruption requires more than calculating lost sales

Where included, business interruption insurance may cover specified financial losses and eligible additional operating costs arising from an insured fire. The calculation depends on the policy wording, basis of cover, limits and maximum indemnity period.

A reduction in turnover is not necessarily the amount payable. The assessment may need to consider expected trading performance, seasonal patterns, saved expenses and costs incurred to reduce the interruption. Terms such as “gross profit” may have a specific insurance definition that differs from their meaning in your accounts.

Keep financial records and evidence of additional expenditure from the outset. Discuss significant recovery measures, such as temporary premises or alternative operating arrangements, with the insurer before committing to costs.

Why consider an independent loss assessor?

Managing a substantial commercial claim can become a considerable task alongside keeping the business running. A loss assessor experienced in business interruption can interpret the policy, coordinate supporting evidence, prepare the claim and negotiate with the insurer’s representatives on your behalf.

Your accountant can provide accounts, forecasts and explanations of trading performance. Your broker can assist with the cover and claims process. A specialist loss assessor can work alongside them to connect the financial evidence with the policy’s definitions and settlement provisions, including whether particular additional costs are recoverable.

Before appointing an assessor, confirm their relevant experience, services, fees and regulatory status. Their role is to establish and present the entitlement supported by the policy and evidence.

Plan the building repairs around recovery

Agree priorities with the building contractor and relevant specialists. Phased repairs or partial reopening may help reduce disruption, provided safety, contamination and essential services have been properly assessed.

The programme should account for equipment replacement, stock replenishment and necessary approvals as well as construction. Completion of the building works does not necessarily mean normal trading resumes immediately.

Back to the top
10
Looking ahead

Upgrades, lasting repairs and prevention

Can I make improvements while the fire repairs are being carried out?

Often, yes. Extensive fire repairs can create a practical opportunity to upgrade fittings, change finishes or alter the layout while the property is already undergoing building work.

First, establish what the insured reinstatement should provide. The repair quotation should normally allow for restoring the damaged parts of the property using materials, fittings and finishes comparable in quality and specification to those present before the fire, subject to the policy terms.

“Like for like” and “new for old” describe different aspects of the settlement. Like for like concerns the specification and quality; new for old generally means replacing covered damaged items with new equivalents rather than deducting simply because the originals were older. Neither automatically entitles you to a higher specification or replacement of undamaged items.

For example, if the damaged kitchen had solid timber doors and stone worktops, the quotation should reflect that specification rather than allow only for a basic replacement kitchen. Photographs, invoices and product information can help establish what was there before. Where the original product is unavailable, a suitable equivalent should be considered.

Optional improvements should be priced separately

You may be able to choose a more expensive kitchen, different flooring, layout changes or additional building work and fund the extra cost yourself. Agree the arrangements with the insurer and contractor before changing the approved scope or ordering materials.

The quotation should clearly identify the insured reinstatement, any original work being omitted or replaced, and the additional cost of your choices. An allowance approved for a particular repair should not be assumed to be freely transferable to unrelated improvements.

Record the agreed specification, additional price, VAT, payment terms and effect on the programme in writing. Where a surveyor is administering the building contract, changes should follow the contractual instruction and valuation process.

Necessary repair work is different from an optional upgrade

Insurers generally do not have to fund improvements chosen purely to enhance the property. However, work should not automatically be excluded as “betterment” simply because the repaired building will be better in some respect than before.

The Financial Ombudsman Service expects insurer-arranged repairs to be effective and lasting. Sometimes achieving that requires changes to the original construction. Necessary work, including applicable building-regulation requirements, should therefore be identified, supported by technical evidence and presented to the insurer for consideration under the policy.

Finally, consider the effect of private improvements on completion. Additional design work, approvals or material deliveries may extend the programme. Do not assume that the insurer will pay additional accommodation costs arising from delays caused by your optional changes; clarify this before committing to the work.

What repair records should I keep?

The paperwork can help with future maintenance, insurance enquiries or a property sale. Ask your contractor or contract administrator who will provide certificates and reports before handover or final payment.

  • Fire and rescue incident reference and relevant investigation findings
  • Before, during and after photographs, schedules of loss and damaged-contents inventories
  • Insurance policy, claim reference, correspondence, acceptance of cover, agreed scope and cost approvals
  • Surveyors’, restoration and structural engineers’ reports, including moisture readings and drying certificates where supplied
  • Asbestos surveys and applicable removal/clearance records
  • Written building contract, specification, cost breakdown, variations, invoices, payment records and receipts
  • Building control approvals and completion certificates, electrical and gas safety paperwork and other relevant inspection or commissioning documents
  • Product details, warranties, guarantees, manuals, snagging records and final sign-off

Keep an organised digital folder and, where useful, paper copies of the evidence showing what happened, what was agreed and how the repairs were completed. These records help with any defects, future insurer questions, and enquiries if you later sell or remortgage the property.

How can I reduce the risk of another house fire?

After a fire, it’s completely understandable to become much more conscious of fire safety.

The latest official statistics for England show there were 26,180 dwelling fires attended by fire and rescue services in the year ending March 2026, of which 23,795 were accidental. Cooking appliances remained the largest specified ignition category, accounting for 42% of accidental dwelling fires. Source: England fire and rescue incident statistics, year ending March 2026.

You can’t remove every risk, but there are sensible precautions worth reviewing once the property is reinstated.

Make sure the home has appropriate working smoke alarms and test them regularly. Keep cooking areas supervised, replace damaged electrical equipment and don’t overload sockets or use obviously defective chargers and cables.

If you smoke, take particular care with disposal. Official statistics show that smoking materials account for a relatively small proportion of accidental dwelling fires but a much larger share of associated fire-related fatalities.

It’s also worth reviewing heaters, candles and other ignition sources and making sure everybody in the household knows how they would leave the property if a fire started.

Your local fire and rescue service can provide much more detailed home-fire-safety advice.

Do smoke alarms really make a difference?

Smoke alarms provide early warning, which can give occupants valuable time to escape.

London Fire Brigade recommends working smoke detection and regularly testing alarms, with heat alarms more suitable for some areas such as kitchens. See London Fire Brigade’s smoke and heat alarm advice.

If your property is being substantially rewired or rebuilt following a fire, it’s worth discussing the appropriate alarm provision with the relevant electrician, building professional or fire-safety specialist as part of the reinstatement.

The repair should not simply recreate outdated safety arrangements where current requirements or sensible improvements need to be considered.

Back to the top
11
Save this checklist

Your fire damage recovery checklist

A practical fire damage recovery checklist

Use this checklist to keep track of the main stages. Acceptance of the claim and approval of repair costs are separate decisions. Some assessments may happen while the insurer considers cover, and urgent safety measures should not wait.

Emergency exception: Necessary action to protect people or prevent further damage may need to proceed before written approval is available. Notify the insurer as soon as possible and retain photographs, invoices and an explanation of why the work could not wait.

Back to the top
12
Popular questions

Fire and smoke damage FAQs

Quick answers to the questions property owners most often ask after a fire. Open any question to read more.

What should I do immediately after a house fire?

Do not re-enter the property until the fire service or another appropriate professional has confirmed it is safe.

Once you’re able to do so, contact your insurer, secure the property, photograph the damage and avoid disposing of items until the insurer or restoration team has advised you what should be retained.

Do not reconnect utilities yourself if they have been isolated following the fire.

Is it safe to go back into a fire-damaged house?

Only once the appropriate professionals have confirmed it is safe.

Fire can weaken structures, damage electrical systems and leave hazardous residues even after the visible flames have gone.

Does home insurance cover fire damage?

Fire is one of the main risks commonly covered by home insurance.

Buildings insurance generally deals with the structure and permanent fixtures, while contents insurance relates to your belongings, subject to the policy terms and limits.

Is smoke damage covered by home insurance?

Smoke damage resulting from an insured fire can form part of the overall claim, subject to the policy.

This is important because smoke can affect rooms and systems well beyond the area where the flames were located.

What is the difference between fire and smoke damage?

Fire damage is caused directly by heat and flames.

Smoke damage occurs when smoke, soot and other combustion residues travel through and settle on other areas of the property.

A room can therefore suffer significant smoke damage without ever being directly touched by flames.

How far can smoke travel through a house?

Potentially throughout the whole property.

Smoke can move through doorways, stairs, gaps, ceiling voids and other openings. In AIR’s own projects, smoke from one area has affected multiple floors and rooms elsewhere in a building.

Can smoke damage a house next door?

Yes.

Smoke can enter neighbouring or adjoining properties even if the fire itself remains elsewhere.

Flats, terraces and properties above commercial premises can all suffer substantial smoke contamination from another unit.

Why does my house still smell of smoke after cleaning?

Smoke residues may remain on or inside porous materials, underneath floors or in hidden areas.

Professional fire restoration treats odour control as part of identifying and removing those residues rather than simply covering the smell with fragrance.

Will smoke smell eventually disappear on its own?

Minor odours may reduce with time and ventilation, but a persistent strong smoke smell can indicate that contaminated material remains.

If the smell continues after cleaning, the source should be investigated before permanent decoration is completed.

Can you paint over smoke damage?

Not as the only treatment.

Affected surfaces normally need appropriate cleaning and preparation first. Specialist stain-blocking or sealing products may form part of the eventual decoration where suitable.

Painting directly over heavy residues risks leaving staining or odour unresolved.

How is soot removed from walls?

The method depends on the type of residue and wall surface.

Professional cleaners may use specialist dry or wet cleaning methods and, in some cases, other restoration techniques. You should be cautious about scrubbing soot-covered absorbent surfaces yourself before the damage has been assessed.

Can soot be dangerous?

Fire residues can contain contaminants from the materials that burned, so heavily affected areas should be treated with appropriate caution.

Use professional advice and suitable protective measures rather than assuming soot is simply ordinary household dirt.

What is professional smoke deodorising?

Smoke deodorising is the process of dealing with fire-related odours after contaminated materials have been cleaned or removed.

Different fires and materials require different approaches, which is why professional restoration standards do not prescribe one universal odour treatment for every property.

Can smoke get beneath floorboards?

Yes.

Smoke and fine residues can move through gaps and into concealed spaces.

Persistent smoke smell beneath flooring is one reason floors sometimes need lifting during fire restoration.

Can smoke damage electrics?

Electrical installations and appliances can be affected by smoke, heat and firefighting water.

Items that have been heavily exposed shouldn’t simply be switched back on without suitable assessment.

Can smoke damage a boiler?

It can.

Whether a boiler needs cleaning, repair or replacement depends on the level of exposure and the advice of an appropriately qualified professional.

AIR has dealt with a fire claim where heavy smoke contamination resulted in boiler replacement.

Does firefighting water count as part of the fire damage?

Water from hoses, sprinklers or exposed openings can damage floors, ceilings, walls and concealed construction as part of the incident. It may require extraction and specialist drying, with moisture checks in hidden layers. Prolonged damp can support mould growth.

See how drying time is assessed.

How long does a fire-damaged house take to dry?

Drying time varies with the amount of firefighting water, materials affected, access and local conditions. A surface can feel dry while moisture remains in subfloors, insulation or wall cavities. A competent drying specialist should use appropriate moisture measurements and record the drying progress rather than promise a fixed number of days.

Where materials remain damp for an extended period, mould growth may develop. Drying needs to be coordinated with specialist cleaning and the agreed reinstatement specification before affected finishes are replaced.

Can mould grow after a house fire?

Yes. Firefighting water or rain entering through damaged roofs can leave materials damp. If moisture remains for long enough, conditions may support mould growth, particularly in concealed areas.

Have affected areas assessed and, where appropriate, professionally dried. The drying FAQ explains why measurements matter.

Does everything have to be replaced after a fire?

No.

Some building materials and contents can be successfully cleaned or restored.

Others may need replacing because of direct fire damage, contamination, heat distortion, water damage or the practical difficulty of restoring them.

Can smoke-damaged furniture be saved?

Sometimes.

Specialist contents restoration can be effective for certain furniture and possessions depending on the materials and severity of the damage.

The insurer or restoration company should assess whether cleaning is sensible before the item is discarded.

Can smoke-damaged clothes be cleaned?

Some can.

However, heavily smoke-affected clothing may need specialist cleaning because unsuitable methods can make odour more difficult to remove.

Should I throw away food after a fire?

Food exposed to heat, smoke or contamination may be unsafe and fire services generally advise discarding affected food.

Take photographs first where practical if you’re claiming for the loss.

Will my entire kitchen need replacing after a kitchen fire?

Not necessarily. The assessment should identify what is damaged and what can safely and effectively be restored. A discontinued colour or range does not automatically entitle you to replacement of the whole kitchen. Check any matching-items provisions: some policies provide additional cover, and the Financial Ombudsman may consider loss-of-match compensation appropriate in particular circumstances. The scope should distinguish necessary repairs from replacing undamaged components solely for appearance.

Read the main kitchen section and the Financial Ombudsman guidance on settling home insurance claims.

What happens if the roof catches fire?

The structure may need specialist assessment and potentially substantial rebuilding.

If the roof is open to the weather, temporary protection may also be required quickly to prevent further water damage.

Do I need a structural engineer after a fire?

Not every fire requires a structural engineer. However, if structural steel, roof timbers, lintels, masonry, floors or other load-bearing elements may have been affected, an engineer may need to assess their condition and specify repairs. Damage is not always obvious from a visual inspection alone.

How much can a fire damage claim cost?

Where fire, smoke and firefighting water affect much of a house, the overall claim can substantially exceed £100,000. Costs may include investigations, strip-out, specialist cleaning, drying, building repairs, contents restoration or replacement, storage, professional fees and alternative accommodation.

A detailed assessment and repair scope are needed to establish the costs for the particular property. Buildings, contents and accommodation expenses fall under their respective policy provisions.

How long does fire damage repair take?

Minor repairs may take weeks. Extensive fires can take many months, and some major claims take more than a year from the incident to completed repairs and reoccupation.

The overall timeline includes investigations, assessments, insurer decisions, cleaning, drying, scope agreement and material deliveries, as well as the building work itself. Ask for a programme that identifies these stages and is updated as the claim progresses.

Why is my fire claim taking so long?

The insurer may be awaiting investigations, specialist reports, repair proposals or supporting costs. Concealed damage discovered during strip-out can also require further assessment and approval.

These steps can take time, but they do not justify unexplained inactivity. Ask what is outstanding, who is responsible and when the next decision is expected. Insurers are required to handle claims promptly and fairly and provide appropriate information about their progress.

What is a loss adjuster?

A loss adjuster is generally appointed by the insurer to investigate and assess the claim. Their work may include examining the circumstances, considering policy cover, reviewing damage and specialist reports, assessing repair proposals and negotiating costs.

They report to the insurer and may coordinate much of the claims process. Their appointment does not, by itself, mean the insurer has accepted cover.

What is a loss assessor?

A loss assessor represents the policyholder. They can prepare and present the claim, gather evidence, liaise with the insurer and loss adjuster, review proposed scopes and negotiate settlement issues.

Their claims role is separate from the technical responsibilities of a surveyor, structural engineer or building contractor.

Do I need a loss assessor after a fire?

Not every claim requires one. However, independent assistance can be valuable where damage is extensive, underinsurance is alleged, costs or cover are disputed, or managing the claim is becoming difficult.

Before appointing a loss assessor, check their relevant experience, FCA status, fees and appointment terms. Your broker may also provide claims assistance.

Do I have to use my insurer’s fire damage contractor?

Not necessarily. You can ask to use your preferred contractor, but the arrangements depend on the policy and settlement route.

Obtain written agreement to the proposed scope and costs before permanent repairs begin. Confirm who appoints and pays the contractor, who is responsible for their work and whether choosing your own contractor affects the settlement amount.

Should I accept a cash settlement after a fire?

Check that the amount is supported by a sufficiently detailed scope and realistic repair costs. Clarify VAT, professional fees, your excess, any deductions and how unresolved or concealed damage will be treated.

Establish whether the offer is an interim payment or a full and final settlement, and what happens to accommodation funding. If you arrange the repairs yourself, you will generally take responsibility for the building contract and managing the work. Independent advice can be useful before accepting a substantial final settlement.

What happens if more damage is found during strip-out?

Record it with photographs and obtain specialist evidence where needed. If it relates to the insured incident, submit the additional scope and costs for written insurer approval before significant extra work proceeds.

Any building-contract instruction or variation procedure must also be followed. Urgent safety work may need to proceed sooner, with prompt notification and supporting records.

Can I stay in the property after a fire?

Only if it is safe and reasonably suitable to occupy. Structural damage, smoke contamination, unsafe services or loss of essential facilities can make occupation inappropriate even where some rooms look unaffected.

Seek advice from the relevant professionals rather than judging safety from appearances alone.

Does home insurance pay for alternative accommodation?

Many home policies cover reasonable alternative accommodation where insured damage makes the home uninhabitable, subject to terms and limits.

Confirm the approved arrangements, funding limit and expected duration with the insurer. Do not assume that accommodation costs caused by privately chosen improvements will be covered.

Can I upgrade the house while it is being repaired?

Often, yes, by agreement. First establish the insured allowance for reinstating the damaged parts with comparable materials and finishes. New-for-old cover does not automatically fund a higher specification.

Price optional improvements separately and agree your contribution, payment terms and any programme changes in writing. Changes necessary for an effective and lasting repair should be considered as part of the claim rather than automatically treated as private upgrades.

Will a fire-damaged house always smell afterwards?

Persistent smoke odour should not simply be accepted as inevitable. It may indicate remaining residues or contaminated materials, including within concealed spaces.

Specialist restoration should identify and address the sources. Raise continuing odour before agreeing that the restoration is complete; masking the smell alone does not demonstrate that contamination has been removed.

Back to the top
IN SUMMARY

Final thoughts

Recovery depends on establishing the full extent of the damage, agreeing the insured work and coordinating safe restoration and reinstatement. Keep written records of decisions, costs and changes, and seek appropriate professional advice where the claim or repairs are complex.